User Tools

Site Tools


landing-checklist

This is an old revision of the document!


Landing

Checklists will look best at a screen resolution of 1280*1024 and above
if you are using lower resolution you might see misaligned text
please Do not try and “fix it”
COMM MET Panel Section Panel Procedure Panel Area & Notes
1027 Mission Dep. Left Panel L1 * Set RAD CONTROLLER - OUT TEMP TO NORM
* Set RAD CONTROLLER (LOOP 1 & LOOP 2) To AUTO A
* Set RAD CONTROLLER - BYPASS MODE (1 & 2) To AUTO
1080 Mission Dep. Right Panel R4 * Set MPS/TVC/ISOL/VLV (SYS1, SYS2, SYS3) To OPEN Hydraulics / Brake Heater
1028 Mission Dep. Center Panel
Front Left
Front Right
Overhead Right
C3
F6
F8
O8
* Set AIR DATA PROBE (Left & Right) to DEPLOY HEAT
* Set AIR DATA To Left
* Set AIR DATA To Right
* Set RADAR ALTIMETERS (1 & 2) To On
Deploy Air Data Probes


Turn On Radar altimeter
1029 Mission Dep. Front Left Panel F3

F2
F4
* Set HUD POWER To ON (Commander)
* Set HUD POWER To ON (Pilot)
* Set PITCH & ROLL/YAW To CSS (Commander)
* Set PITCH & ROLL/YAW To CSS (Pilot)
Commander And Pilot HUD Power

Take Manual Control
1031 Mission Dep. Overhead Right Panel O8 * Set MLS (1/2/3) Switches To ON
* Set MLS Thumbwheel To (111)
Auto Software Transition To OPS 305
Microwave Scan Beam Landing System
1033 Mission Dep. HUD Display Window * Press LANDING GEAR ARM (Twice) Arm The Landing Gear
1034 Mission Dep. HUD Display Window * Press LANDING GEAR DOWN (Twice) Deploy The Landing Gear
Touchdown
1035 Mission Dep. HUD Display Window * Press CHUTE ARM (Twice)
* Press DEPLOY CHUTE (Twice)
Gently Push The Nose Down Until The Nose Wheel thouchdown.
Use The The Rudder To Steer. Apply Wheel Brakes.
1036 Mission Dep. HUD Display Window * Press CHUTE JET (Twice) Release Brake Chute
1037 Mission Dep. End Of Mission
All the checklists were Originally Created by Michael Swannick, and are available for download in PDF format in the SSM site.
Adapted for Wiki format by Marvx and spaceboy7441
landing-checklist.1220958193.txt.gz · Last modified: 2008/09/09 11:03 by uri_ba