User Tools

Site Tools


sts124-mission-checklist

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
sts124-mission-checklist [2008/11/12 07:08]
uri_ba added links to OPS2
sts124-mission-checklist [2008/11/12 07:09] (current)
uri_ba added links to OPS2
Line 97: Line 97:
 ^  1262  |  Mission Dep.  |  AFT Right \\ Front Left \\ AFT Left  |  A8L \\ F6 \\ A7L \\ \\ \\ \\ A6L  | * Set RMS POWER To OFF \\ * Set FLT CNTLR POWER To ON \\ * APDS Control Commands \ Press POWER OFF \\ * Set CONTROL PANEL POWER (A - B - C) = OFF \\ * Set HEATERS CDU POWER (H1 - H2/DCU - H3/DCU) = OFF \\ * Set APDS POWER (ADS - BDS - CDS) = OFF \\ * Docking System Power \ System Power (MN A & MN B) = OFF \\ * Docking System Power \ PSU Power ( MN A & MN B) = OFF | ^  1262  |  Mission Dep.  |  AFT Right \\ Front Left \\ AFT Left  |  A8L \\ F6 \\ A7L \\ \\ \\ \\ A6L  | * Set RMS POWER To OFF \\ * Set FLT CNTLR POWER To ON \\ * APDS Control Commands \ Press POWER OFF \\ * Set CONTROL PANEL POWER (A - B - C) = OFF \\ * Set HEATERS CDU POWER (H1 - H2/DCU - H3/DCU) = OFF \\ * Set APDS POWER (ADS - BDS - CDS) = OFF \\ * Docking System Power \ System Power (MN A & MN B) = OFF \\ * Docking System Power \ PSU Power ( MN A & MN B) = OFF |
 ^  1263  |  Mission Dep.  |  Center \\ \\ \\ \\ \\ Overhead AFT \\ \\ Center ​ |  C2 \\ \\ \\ \\ C3 \\ 014 \\ 016 \\ C3  | * Enter [[ops2#​ops202|OPS 202 PRO]] - If Not Displayed On CRT2 (Right Keypad) \\ * Enter ITEM 3 EXEC (Right Keypad) \\ * Enter ITEM 22 EXEC (Right Keypad) \\ * Enter ITEM 27 EXEC (Right Keypad) \\ * Enter ITEM 23 EXEC (Right Keypad) \\ * Set OMS ENG (Right) To ARM/PRESS \\ * Confirm L OMS ENG VLV Is OFF \\ * Confirm R OMS ENG VLV Is ON \\ * Press EXEC - (Right Keypad) Confirms ready for OMS burn | ^  1263  |  Mission Dep.  |  Center \\ \\ \\ \\ \\ Overhead AFT \\ \\ Center ​ |  C2 \\ \\ \\ \\ C3 \\ 014 \\ 016 \\ C3  | * Enter [[ops2#​ops202|OPS 202 PRO]] - If Not Displayed On CRT2 (Right Keypad) \\ * Enter ITEM 3 EXEC (Right Keypad) \\ * Enter ITEM 22 EXEC (Right Keypad) \\ * Enter ITEM 27 EXEC (Right Keypad) \\ * Enter ITEM 23 EXEC (Right Keypad) \\ * Set OMS ENG (Right) To ARM/PRESS \\ * Confirm L OMS ENG VLV Is OFF \\ * Confirm R OMS ENG VLV Is ON \\ * Press EXEC - (Right Keypad) Confirms ready for OMS burn |
-^  1264  |  Mission Dep.  |  Center ​ |  C3 \\ C2  | * Set OMS ENG (Right) To OFF \\ * Check [[ops2#​ops202|OPS 202 PRO] \\ * Enter ITEM 1 EXEC (Right Keypad) |+^  1264  |  Mission Dep.  |  Center ​ |  C3 \\ C2  | * Set OMS ENG (Right) To OFF \\ * Check [[ops2#​ops202|OPS 202 PRO]] \\ * Enter ITEM 1 EXEC (Right Keypad) |
 ^  1269  |  Mission Dep.  |  AFT Left \\ AFT Right  |  A6U \\ A8L \\ A8U  | * Set RMS POWER To PRIMARY \\ * Set RMS BRAKES To OFF \\ * Set FLT CNTLR POWER To ON | ^  1269  |  Mission Dep.  |  AFT Left \\ AFT Right  |  A6U \\ A8L \\ A8U  | * Set RMS POWER To PRIMARY \\ * Set RMS BRAKES To OFF \\ * Set FLT CNTLR POWER To ON |
 ^  1270  |  Mission Dep.  |  AFT Right  |  A8L  | * Use The RMS To Return The OBSS To Its Latched Position. | ^  1270  |  Mission Dep.  |  AFT Right  |  A8L  | * Use The RMS To Return The OBSS To Its Latched Position. |
sts124-mission-checklist.txt ยท Last modified: 2008/11/12 07:09 by uri_ba